Ubiquiti · Cables & Accessories
UACC-OM-SM-10G-D 10G Single-Mode Optical Module
Model UACC-OM-SM-10G-D
Works with
- UniFi and other switches with SFP+ ports accepting 10 GbE single-mode BiDi optics
- Single-mode fiber with LC UPC connectors; the D suffix pairs with the matching opposite-wavelength module at the far end
A 10 GbE SFP+ fiber module that uses BiDi optics over single-mode fiber at up to 10 km.
Features
10 GbpsFastest wired port
Works at both 1 Gbps and 10 Gbps, so it still links usefully on ports negotiated at 1 Gbps
Is it for you?
A 10 GbE SFP+ fiber module that uses BiDi optics over single-mode fiber at up to 10 km, for linking Ubiquiti switches point-to-point over long runs.
Choose it if these matter
- Official Ubiquiti accessory optics are validated against UniFi switches, which avoids the third-party-optic compatibility warnings in UniFi OS
Skip it if these rule it out
- BiDi optics pair in matched TX/RX wavelengths, so both ends of a link need the correct companion module
- Single-mode only: it cannot link over multimode fiber runs
- 0 to 70 C operating range rules out unconditioned outdoor enclosures in hot or freezing climates
Good for: Homelab · Home office · Wired backhaul
Which version should you buy?
Selected package: UACC-OM-SM-10G-D (single).
Selected package
UACC-OM-SM-10G-D (single unit)
This pageModel: UACC-OM-SM-10G-D
- What differs
- One 10G single-mode BiDi module.
- Best for
- Building a point-to-point fiber link one end at a time.
Pack size
UACC-OM-SM-10G-D-2 (2-pack)Model: UACC-OM-SM-10G-D-2
Contents and availability
Two modules bundled for a complete link.
Outfitting both ends of one fiber run in one purchase.
UACC-OM-SM-10G-D-20 (20-pack)Model: UACC-OM-SM-10G-D-20
Contents and availability
Twenty modules for installers wiring many runs.
Multi-link installations at scale.
Watch out
- The -2 and -20 suffixed SKUs are pack sizes of the same module, not different optics.
- BiDi single-mode modules come in paired TX/RX wavelengths: order the matching companion module for the other end, not two identical ones, unless the pair listing includes both directions.
- Multimode modules (OM-MM) are a different product line and do not reach 10 km.
Compare with similar models
| Specification |  This oneUACC-OM-SM-10G-D 10G Single-Mode Optical Module |  Cable Matters 160012 |  Cat6A 90° Toolless Keystone Jack, Unshielded |
|---|---|---|---|
| Works with | UniFi and other switches with SFP+ ports accepting 10 GbE single-mode BiDi optics, Single-mode fiber with LC UPC connectors; the D suffix pairs with the matching opposite-wavelength module at the far end | Any device with a standard RJ45 Ethernet port: PCs, servers, routers, switches, printers, NAS, VoIP phones and PoE devices | Solid copper 23-24 AWG unshielded Cat5e/Cat6/Cat6A cable, trueCABLE unshielded staggered modular patch panels, Standard keystone wall plates and surface-mount boxes |
| Best for | Homelab, Home office, Wired backhaul | Homelab, Home office, Wired backhaul, Lots of smart devices | Wired backhaul, Homelab, Home office, Lots of smart devices |
| Open | View | View |
Full specifications (9)
- Model
- UACC-OM-SM-10G-D
- Form factor
- SFP+ module
- Data rate
- 1 / 10 Gbps
- Media
- Single-mode fiber, duplex LC UPC connector, BiDi (TX 1310 nm / RX 1550 nm direction)
- Cable distance
- 10 km (6.2 mi)
- Power consumption
- 1W max
- Operating temperature
- 0 to 70 C (32 to 158 F)
- Pack options
- Single unit, 2-pack, 20-pack
- Laser class
- Class 1 laser product per IEC/EN 60825-1:2014
Downloads & support
Setup: No drivers needed: insert the module into an SFP+ port and it is detected by the switch's management interface. Clean the LC connector before insertion; do not look into the fiber or module while powered.
Links go to the manufacturer’s official pages, so you always get the latest, genuine files.
Sources: Ubiquiti specifications · store.ui.com. Photos: Ubiquiti. Specifications checked November 8, 2026. Spotted an error? Tell us.