Skip to content

goCoax

goCoax MA2500D

Check your model and package

MA2500D single adapter

MoCA standard:
MoCA 2.5 bonded over coax
Throughput (maker claim):
Up to 2.5 Gbps real traffic throughput with bonded channels
Bonded channels:
Up to 5 channels bonded

We may earn a commission. How we earn.

Find on Amazon
Package details

Model: MA2500D

One MoCA 2.5 adapter; you need at least two on a coax network.

Condition:
Confirm new or reconditioned on the listing
Quantity:
1 unit

Important limit: Needs at least two MoCA adapters to form a network; one unit alone does nothing

How many units?

Confirm condition, quantity and included accessories on the retailer’s listing.

Compare versions and packages

Specifications checked November 5, 2026. Full product details

goCoax MA2500D MoCA 2.5 Adapter

A MoCA 2.5 Ethernet-over-coax adapter with a single 2.5GbE port that turns existing coax TV wiring into a wired network of up to 2.5 Gbps.

Which version should you buy?

Selected package: MA2500D single adapter.

Selected package

  • MA2500D single adapter

    This page

    Model: MA2500D

    What differs
    One MoCA 2.5 adapter; you need at least two on a coax network.
    Best for
    Adding to or replacing one node in an existing goCoax/MoCA setup.

Related models and generations

These are different products. Check their specifications separately.

  • MA2500D pair

    Two MA2500D adapters sold together as a starter pair.

    Starting a new point-to-point coax Ethernet link.

Purchase links appear where the exact offer is verified. Confirm the named model, quantity and accessories before ordering.

Watch out

  • The WF-803M is the older gigabit-port goCoax MoCA adapter; check the model before buying a pair so both nodes match.
  • At least two MoCA adapters are required for a working network.

Why people pick it

  • 2.5 Gbps bonded MoCA 2.5 throughput over existing coax wiring
  • 2.5GbE Ethernet port matches the MoCA link rate, unlike gigabit-port adapters
  • Up to 16 nodes on one coax network
  • Wall- or desk-mountable with a simple, app-free setup

Know before you buy

  • Needs at least two MoCA adapters to form a network; one unit alone does nothing
  • Cannot share coax with satellite TV (D-band overlap)
  • Requires MoCA-rated splitters and usually a PoE filter on cable-ISP installs
  • goCoax's own web store showed the MA2500D as out of stock; availability varies by seller

Full specifications

MoCA standardMoCA 2.5 bonded over coax
Throughput (maker claim)Up to 2.5 Gbps real traffic throughput with bonded channels
Bonded channelsUp to 5 channels bonded
Network sizeUp to 16 nodes in the same MoCA network
Ethernet1x 2.5GbE RJ45 LAN port
Coax port1x MoCA in (F-connector coax port)
ControlsReset button and MPS (pairing) button
Status LEDs4 LEDs: Power, ETH, SEC, MoCA
MountingWall mounting or desktop mounting
Frequency rangeMoCA uses 1125-1675 MHz (D-band); splitters and the coax plant must pass this range
SetupConnect the coax and Ethernet cables and power on; goCoax says installation takes a few minutes
Cable ISP useWhen sharing coax with a DOCSIS modem, check the modem's upper frequency (typically 1002 MHz) and install a PoE (point-of-entry) filter; with 1218 MHz DOCSIS 3.1 modems, use a 2-way splitter to separate the modem from the MoCA adapter
Satellite TV conflictStandard MoCA D-band frequencies overlap satellite TV, so the two cannot share the same coax network
Minimum devicesA MoCA network needs at least two MoCA adapters or other MoCA equipment
Predecessor comparisonUpgrades the WF-803M's gigabit Ethernet port to 2.5GbE

From manufacturer documentation, checked November 5, 2026. Spotted an error? Tell us.

Alternatives to consider