We may earn a commission. How we earn.
Check price on AmazonWorks with
- Works with cable and FiOS TV and internet services and most MoCA-enabled routers and cable modems
- Backward compatible with MoCA 2.0, 1.1 and 1.0 adapters on the same coax network
- 1 Gbps port
Is it for you?
A single-port MoCA 2.5 coax-to-Ethernet bridge that turns existing coax wiring into a wired network backbone with up to 2.5 Gbps MoCA throughput and a 1 Gbps Ethernet port.
Choose it if these matter
- Turns existing coax runs into a wired Ethernet backbone, so you get near-wire reliability without pulling new cable
- MoCA 2.5 link rates up to 2.5 Gbps shared across the coax network, backward compatible with older MoCA adapters
- MoCA Protected Setup and auto-detection make pairing a second adapter quick
Skip it if these rule it out
- Ethernet port is 1 Gbps, so devices cannot use the full 2.5 Gbps MoCA link speed (the ECB7250 adds a 2.5G port)
- Not compatible with DIRECTV, Dish and other satellite TV, AT&T internet or AT&T U-verse coax networks
- DOCSIS 3.1 modems can overlap frequencies and cause random disconnects; a minimum of two adapters (or a MoCA-enabled router) is needed to form a network
Good for: Wired backhaul · Streaming · Gaming · Large homes
Which version should you buy?
Selected package: ECB6250 single adapter (US).
Bundles and accessories
ECB6250 starter kit (two adapters)
Contents and availability
Two adapters plus power supplies in one box.
Buyers building a new two-node MoCA network.
Condition
ECB6250 single adapter
This page- What differs
- One adapter with a 1 Gbps Ethernet port; two are needed to form a network unless a MoCA-enabled gateway is used.
- Best for
- Extending an existing MoCA network or pairing two yourself.
Watch out
- The ECB7250 looks nearly identical but has a 2.5 Gbps Ethernet port instead of 1 Gbps.
Compare with similar models
| Specification |  This oneECB6250 MoCA 2.5 with 1.0Gbps Ethernet Port |  Ethernet over Coax 2.5Gbps Adapter |  ECB7250 Bonded MoCA 2.5 |
|---|---|---|---|
| Works with | Works with cable and FiOS TV and internet services and most MoCA-enabled routers and cable modems, Backward compatible with MoCA 2.0, 1.1 and 1.0 adapters on the same coax network | Existing coaxial cabling with a MoCA-compliant network; Verizon FiOS and Spectrum are listed as compatible, Any device with an Ethernet port; not for DirecTV, DISH, satellite TV or AT&T U-verse coax | MoCA 2.5, 2.0, 1.1 and 1.0 devices, Most MoCA-enabled routers and cable modems (not satellite TV, AT&T internet or AT&T U-verse coax networks) |
| Fastest wired port | 1 Gbps | 1 Gbps | 2.5 Gbps |
| Best for | Wired backhaul, Streaming, Gaming, Large homes | Budget, Streaming, Wired backhaul, Gaming, Large homes | Wired backhaul, Multi-gig internet, Gaming, Streaming |
| Open | View | View |
Full specifications (13)
- Model number
- ECB6250
- MoCA version
- MoCA 2.5, backward compatible with MoCA 2.0/1.1/1.0
- Ethernet interface
- One 10/100/1000 Base-T 802.3ab port, RJ45
- MoCA throughput (maker spec)
- Up to 2.5 Gbps unidirectional
- RF connector
- F-type, 75 ohm
- Coax frequency range
- Extended D-band, 1125-1675 MHz
- Transmit power
- +1 to +9 dBm typical, 9 dBm max
- Network size
- Up to 16 MoCA devices (including network coordinator)
- Link delay
- 3.6 ms typical, 6.3 ms max
- Security
- MoCA Protected Setup (MPS)
- Power adapter
- Input 100-240V at 0.6A, output 5VDC at 2.0A
- Operating temperature
- 0 to 40C ambient
- Regulatory
- FCC 15B; UL, cUL 60950-1; ITU-T K.21; RoHS; SNE
Downloads & support
Setup: No drivers needed: it is a plug-in network bridge. Connect one adapter at the router (or use a MoCA-enabled gateway) and one at the device; firmware updates are available from ScreenBeam's support page.
Links go to the manufacturer’s official pages, so you always get the latest, genuine files.
Sources: ScreenBeam specifications · screenbeam.com · Manual / documentation · screenbeam.com. Photos: ScreenBeam · screenbeam.com. Specifications checked November 9, 2026. Spotted an error? Tell us.